It is for 2 halls. One has 3 metre high ceilings and needs 19kw of heat as it 16metres by 7 or something. The other is all is all over the place and has half 3 metre ceilings and half 10m ceilings with those plaque heaters hanging down. But they intend on extending the upstairs so all ceilings will be 3 metres high. And that is what I based my calcs on
-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Boiler and 8 rads in church rooms....
- Thread starter mutley racers
- Start date
- Status
Fan convectors are ideal for churches as they offer rapid heating in large spaces and quiet in operation . Downside they cost a bit more , I would push for what you originally priced and if they deviate then extras
Emailed them stating what I got from here about sticking to original design. Let's see what happens
P
plumber0808
How did you get on with this?
The churches that I have worked on I have fitted Biddle LSTs. They are good, instant heat and they look ok.
Low Surface Temperature | Biddle-Climate control and climate separation equipment
The churches that I have worked on I have fitted Biddle LSTs. They are good, instant heat and they look ok.
Low Surface Temperature | Biddle-Climate control and climate separation equipment
Have not started it yet. Will at the end of the month. I shall look into those biddles. Thanks you
- Status
