Hello, I have a glow worm ultracom HXI 15 boiler. When's it is on CH cycle it runs but as soon as it reaches the set water temp of 66 degrees it cuts out. It then re starts once the water temperature has cooled. This it does continuously until house has reached temp. The pump in the airing cupbiard doesnt stop its only tge boiler. Which takes ages as it just keeps cutting out. It does not do this during the HW cycle. Many thanks in advance for any help.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Boiler cutting out whenever CH running. in the Boilers area at Plumbers Forums
- Status
- Messages
- 4,850
A Gas safe Registered Heating Engineer will sort that for you quite easily.
- Status
Similar plumbing topics
well, I really cannot see what extra features...
thanks....
yes, so my diagram and wording is...
Finally (I hope) got to the bottom of this...
No taps or showers have been replaced. We did...
So you don’t have any of the blending valves /...
- AnthonyG
- Boilers
- 3
- 2K
- Latest:
- ShaunCorbs
