Boiler Quote | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Boiler Quote in the Boilers area at Plumbers Forums

Status
Not open for further replies.

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
I'm quoting to replace a combi with a worcester greenstar 25i and a drayton wireless room stat. Will have to fill in existing flue hole as the boiler is being located on an adjacent wall.
Bearing in mind I'm in london, is £1865 way over the odds?
I've basically put 20% on materials as well as my labour.

What do you guys charge as labour for a boiler - shouldn't take more than a day.

I'm REALLY crap at quoting!!!!
 
Whats the total for materials - boiler, flue, controls, filter, lime fighter, chemicals, pipe, fittings, fittings, bricks and consumabble
 
a day and 2 hours the next day (paperwork)

why dont you fit the comfort 1 less wiring and easier to fit etc

labour round me i normally charge 350-400 for a comb swap (no power flush) + materials same place

so about £600 i would quote for , round me
 
Hammers will tell you the cost of filling a plasterboard hole where the flue was is £175 but lets not go there!

(Sorry hammers)
 
just me - I doubt I'll flush to be honest
 
£600 + the cost of the boiler & flue?
 
I charge 2 days labour for a boiler change so £440.00 plus 10% on mats
 
Stick with £1850 for London thats about right no point doing it if you're not making money!

Yeah I've just sent it over .. Fingers crossed I get it as she has a couple of properties so may prove to be a good customer - time will tell!!
 
I think you're about right. As long as YOU are happy with the profit you'll make then the price is right.
 
so why do I get swaps and charge £2300 - 2500 in Devon, to be frank I think your far to cheap, especially if you live in London and have the extortionate prices to pay for beer alone up there.
 
so why do I get swaps and charge £2300 - 2500 in Devon, to be frank I think your far to cheap, especially if you live in London and have the extortionate prices to pay for beer alone up there.

yea but all the em all the aliens who will go cheap and drive the prices down
 
Absolute on my arse minimum is £600 plus £100 for a labourer, materials with £100 on top for that time you need a forty five degree flie bend.
 
so why do I get swaps and charge £2300 - 2500 in Devon, to be frank I think your far to cheap, especially if you live in London and have the extortionate prices to pay for beer alone up there.

Are you joking about £2300 - £2500 a boiler swap?? :/
 
if you swim in the mud with the plankton, you will get eaten by a whale, get out of it and become a whale, just because others go cheap doesnt mean you have to, they wont be there in a year or two as they cant survive by being cheap, why try and compete.
 
Status
Not open for further replies.

Similar plumbing topics

Good job buddy. Rather than a beer, if you’re...
Replies
24
Views
3K
J
A gas engineer with respect and quality will...
Replies
7
Views
5K
Mark Butler
M
Anyway, you can always increase the boiler...
Replies
16
Views
2K
That looks like oil fit twin. Insides plastic...
Replies
2
Views
1K
Back
Top