Boss Adapter Connecting Up To 32mm ABS Waste Wipe | General DIY Plumbing Forum | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Boss Adapter Connecting Up To 32mm ABS Waste Wipe in the General DIY Plumbing Forum area at Plumbers Forums

Messages
36
I have a boss adapter to connect to my basin waste to soil branch but the I am trying to work out what connector I need on the boss itself to connect up my 32mm solvent weld waste pipes.

I currently have a solvent weld adapter in the first picture below and my ABS 32mm waste fits in there to solvent weld. The problem is the adapter is PVC and read you cant solvent weld ABS to PVC. I then found the following adapter which would work as it doesn't require solvent welding the waste onto it however how would I then convert to a solvent weld pipework further up - do I need a coupler of some sort? I don't want to use push fit pipework as it will be behind tiles so working out a way of changing from push fit (at the boss connector) to solvent weld later on...

Adapter For Boss

IMG_8982.JPGIMG_8983.JPG
 

Similar plumbing topics

  • Question
Thanks. I've found a rubber one so will give...
Replies
7
Views
2K
If the coupling fits, then no need for what I...
Replies
10
Views
2K
Yes you can solvent weld it to the grey pipe...
Replies
3
Views
2K
Deleted member 120897
D
  • Question
With patience, I’ve not come across a socket...
Replies
4
Views
930
  • Question
This will probably work, it's 50mm outside...
Replies
9
Views
1K
Back
Top