- Messages
- 8
Hi, Hoping someone can help me out, I'm stuck. I have a Camray 5 boiler, which will fire up and burn fuel for around 10-20mins, no heat to the radiators although I have an initial burst of hot water (10-20mins). I have changed the pump, this week, changed the thermostat about 10 months ago, changed the 3 port valve as the last one had a leak, changed the diverter actuator, this week. When the system was empty I stuck in some inhibitor to clean it out. I'm still having the same issues, it fires up and burns fuel around twice per day for 10-20mins then cuts off. The pipes on each side of the pump are warm and the initial pipes around the 3 port valve are also warm, I can move the manual override arm with expected resistance but makes no change to the problem. Getting nothing within the house and no drop in pressure? Nothing happens when I press the reset button.
Any help would be very much appreciated.
Any help would be very much appreciated.