Can't get a plumber - DIY advice | General DIY Plumbing Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Can't get a plumber - DIY advice in the General DIY Plumbing Forum area at Plumbers Forums

Messages
12
I'm renovating a house. Can barely get ANY tradesman (I need alot of work done). Did all my own electrics - now for plumbing!

I want to use six 4-rail manifolds(pictured) to run 10 radiators. 3 for flow, 3 for return attached to 22mm. Located in a central place (under landing floorboards) then 15mm speedfit to each rad. I like the idea of a central connection as the landing will be laid with carpet that can be pulled up. The tiles and laminate flooring in the other rooms cannot (well, without cost anyways!)!

Good? Bad?

The CH is holding up things. These days, anything I can do myself, I will do it. I can push some pipes together! And, TBH, I can chase the walls (downstairs will need that as there's a concrete slab) and bury the pipes properly. I honestly don't have a plumber I know and trust to do this properly.

Oh, and a new boiler will be installed when I can finally get a plumber.

Thanks a lot.
David
 

Attachments

  • railmanifold.jpg
    railmanifold.jpg
    21.5 KB · Views: 35
That’s fine just use home runs (no joints other than manifold or rad) and mark each pair back to a central spot
 
Good or bad?
Good for future maintenance
Bad if you need to drill dozens of holes in joists and will probably use lots more pipe
Using routes from the previous install👍

Plumber was only 144 per radiator, chased. That was an estimate though, not a quote.

I won't even save much, but done right guaranteed. And I'll learn for the next house!

Cheers
 

Similar plumbing topics

That's what I was hoping, looks like a good...
Replies
5
Views
936
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
980
  • Question
That's fine, I get it he's a sh*t however the...
Replies
22
Views
3K
  • Question
Only other items that may cause noise are the...
Replies
13
Views
2K
  • Question
He may have had it tested and put it through...
Replies
16
Views
6K
Back
Top