Cast iron question for the mature lot on here.

[Sharp Point]

thought you already bought it from Hargreaves foundry

Lol, are you on the ale tonight mr C?

 

[ShaunCorbs]

Lol, are you on the ale tonight mr C?

no post 13?

but will be 3.5"

 

[Sharp Point]

I’ve built already, one complete stack in 4” pipe and the materials were from Hargreaves. I’ve got to connect onto an old section( that terminates on the highway) this is why I need to clarify the old pipe size( OD of 115mm approx) to purchase the new materials to connect on to.

 

[Sharp Point]

post 13?

Sorry I should’ve put ‘ previous materials’

You know what it’s like, trying to write whilst working.

 

[ShaunCorbs]

I’ve built already, one complete stack in 4” pipe and the materials were from Hargreaves. I’ve got to connect onto an old section( that terminates on the highway) this is why I need to clarify the old pipe size( OD of 115mm approx) to purchase the new materials to connect on to.

i get you now should be 3.5

timesaver coupling will take up any difference as a back up plan

 

[Sharp Point]

i get you now should be 3.5

timesaver coupling will take up any difference as a back up plan

Ooooh, wazat??

 

[ShaunCorbs]

around 90mm internal

 

[ShaunCorbs]

Ooooh, wazat??

https://www.saint-gobain-pam.co.uk/sites/pamline_uk/files/timesaver_brochure_august_20151.pdf

pg9

 

[Sharp Point]

Thanks and that is a last resort. I don’t think the heritage people will allow that though, they’re being proper strict and know their stuff too.

 

[ShaunCorbs]

Thanks and that is a last resort. I don’t think the heritage people will allow that though, they’re being proper strict and know their stuff too.

tell it a clip / bottom support

 

[Sharp Point]

tell it a clip / bottom support

Damn, I’ll weld some ears to it if need be

 

[Sharp Point]

But hoping I can match up the old with new first, I hate being defeated

 

[ShaunCorbs]

But hoping I can match up the old with new first, I hate being defeated

im sure Hargreaves could wip something up for you

 

[Ben-gee]

If the heritage people are strict and know there stuff, can’t they help you out with approved suppliers?

 

[Belli]

Piece of cake with a 1mm slit disc.

I find it easier using a diamond blade on cast it gives a lovely cut and no where near as much mess while cutting

 

[Sharp Point]

I find it easier using a diamond blade on cast it gives a lovely cut and no where near as much mess while cutting

So does a 1mm inox slit disc. I am a very good with metal and power tools