Central heating economy | Central Heating Forum | Page 2 | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Central heating economy in the Central Heating Forum area at Plumbers Forums

Status
Not open for further replies.
the radiators could do with balancing to bring the return temp up.

Has the rad circuit got its own pump?
 
All rads do work ok, im not sure about pump. There is a pump at UFH manifold zone and pump at boiler but i cannot see anyother pump
 
Ive also just noticed at the manifold the flow pipe 32mm bore is very hot serving rads and UFH but the return pipe is luke warm from rads and UFH
 
I mean ballancing as ajusting the flow rate through the rads to give the correct return temp and could also be done by altering pump speed but its not a diy job realy
 
Status
Not open for further replies.

Similar plumbing topics

Replies
0
Views
449
Can central heating / gas engineer expert help...
Replies
0
Views
824
Thanks both - very helpful indeed. Will set to...
Replies
3
Views
3K
That's a fair better idea or costly mistakes...
Replies
5
Views
1K
https://www.plumbersforums.net/threads/problems...
Replies
6
Views
1K
Back
Top