Clicking sound from external stop tap | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Clicking sound from external stop tap in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
4
Hello
I am hoping someone can help with a very frustrating issue. I have noticed a clicking sound in the water pipes when the cold water is used. It is especially when the washing machine is going or when the toilet is flushed - the clicking noise vibrates through the pipes in the whole house and can be heard upstairs. I have traced the noise to the external stop tap - whenever the clicking occurs the stop tap vibrates and can only be stopped by running the cold tap and turning it off slowly. Any ideas why this might be happening? I’ve tried turning the stop tap lower but this doesn’t solve it
Thanks in advance for any help!
 
Thank you for your reply. I did ring Yorkshire Water but typically in the day the engineer came it didn’t happen - until about 10 minutes after he left! He didn’t look at the stop tap and said he thought it must be air in the pipes. I’ll call them again to come back! Thank you for your help
 
Hello
I am hoping someone can help with a very frustrating issue. I have noticed a clicking sound in the water pipes when the cold water is used. It is especially when the washing machine is going or when the toilet is flushed - the clicking noise vibrates through the pipes in the whole house and can be heard upstairs. I have traced the noise to the external stop tap - whenever the clicking occurs the stop tap vibrates and can only be stopped by running the cold tap and turning it off slowly. Any ideas why this might be happening? I’ve tried turning the stop tap lower but this doesn’t solve it
Thanks in advance for any help!

Are you sure it's the external one? Is it clicking or banging? Probably loose pipes. Is it a meter turning?
 
I am sure it’s the tap. Whenever I hear the ticking I’ve been out to the tap and it is vibrating. We don’t have a water metre so it can’t be that

So you hear the clicking inside, but the boundary (external) tap is just vibrating? Have you checked your incoming stopcock/tap?
 

Similar plumbing topics

  • Question
I would of clipped the pipework but it is...
Replies
2
Views
362
  • Question
Thanks for the tip. I have an outside tap so...
Replies
7
Views
486
So it’s 4am and after the noise woke me up...
Replies
7
Views
1K
  • Question
Hi There Try clearing your browsing history...
2 3
Replies
64
Views
7K
  • Question
Hi Did you ever find out what the issue was?
Replies
1
Views
1K
Back
Top