D
Dave Box
A Big Hello to everyone, I'm new to the Forum and would appreciate any help that you can give. I have just purchased a New Drayton Digistat +3 22087 hard wire model to replace my current mechanical Micromark room thermostat which contols my boiler/room temp. I have removed it from it's wall mounting and it reveals a mains cable which has 4 cables in it, One of each of the following RED/BLUE/YELLOW/EARTH.
My problem is as follows, when reconnecting the cables to the New Drayton Digistat + 3 do I just connect the Red & Blue to the L & N Terminal on the new T/Stat and egnore the Yellow which has a red sleeve over it, and I presume is the live switch cable for the Micromark. The Drayon Manual tells me to egnore the neutral and earth connections as the unit is double insulated. any help would be greatly appreciated
My problem is as follows, when reconnecting the cables to the New Drayton Digistat + 3 do I just connect the Red & Blue to the L & N Terminal on the new T/Stat and egnore the Yellow which has a red sleeve over it, and I presume is the live switch cable for the Micromark. The Drayon Manual tells me to egnore the neutral and earth connections as the unit is double insulated. any help would be greatly appreciated