moved in to new house last week
Going to fit a Spirotech mb3
System dirty
Flushing etc first
Below the boiler there is a manual bypass
Ie tee from flow to return pipe .tee on return pipe
Gate valve in middle (closed)
Struggling to fit spirotech with the bypass there
Can I not just take trv off one radiator
To create a bypass
Pipe work from boiler goes through concrete floor
Any advice would be appreciated
Going to fit a Spirotech mb3
System dirty
Flushing etc first
Below the boiler there is a manual bypass
Ie tee from flow to return pipe .tee on return pipe
Gate valve in middle (closed)
Struggling to fit spirotech with the bypass there
Can I not just take trv off one radiator
To create a bypass
Pipe work from boiler goes through concrete floor
Any advice would be appreciated