Ferroli Modena 102 | Plumbing Jobs | The Job-board | Page 2 | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Ferroli Modena 102 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
You checked that the div has fitted correct flue restrictor? If it was a DIY might have shoved wrong one in.

Also check silicone tube back to gas vale is clean and clear of shister.
 
I couldn't download the manual on my phone and there was no reference to it on the data label,I relied on the gas rate, which I did a good three times......Im thinking this may be my mistake.
 
What are the insulation pads like? They often have really bad cracks which the flame impinges on, resulting in high CO readings.
 
Status
Not open for further replies.

Similar plumbing topics

I
  • Locked
Not in open forum. Read the rules.
Replies
1
Views
910
Dotty
D
M
  • Locked
Welcome to the forum Micky , please get your...
Replies
2
Views
7K
Barry98
B
P
  • Locked
You just had the answer. Flue is too long
Replies
1
Views
1K
Back
Top