Flue Gas Analysers and cold | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Flue Gas Analysers and cold in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
K

kevin@gesuk

With this cold snap and the cold winter forecast, I recommend that instruments such as FGA, multimeters and other test instruments are taken inside during the night and if possible put them in the front of your vehicle between jobs.

Modern electronic instruments do suffer from condensation as the components are packed very close together on the circuit board.

They also have LCD displays which do not work below minus ten C

If you accidentally leave your instruments in the vehicle over night, put it in a sealed plastic bag to warm up; this will hopefully prevent condensation forming inside the instrument.

Kevin
 
Is this a record for thank you's?

Thanks Kevin. I did this last winter but must admit I'd forgotten to do it this time round. This cold weather also ruins silicone and glue and stuff like that (except the solvent weld still smells as good as ever despite the temerature ...)
 
Does the batterys on drills etc no good aswell. After having my drills nicked out of man van overnight once I always empty my stuff out everynight without fail.
 
same here,i never leave anything in my van overnight.
 
I went to do a landlord cert yesterday and even my bloody U gauge was frozen solid looked real stupid tryin to defrost a bit of plastic tube to get on with a safety check lol
 
thanks will give that a go in this weather even my l,d,f froze to im glad i bring my anton in doors lol
 
Photo of damage caused by water/ condensation damage. The circuit board could have been saved if they dried it out in an airing cupboard.

Board-Corrosion.jpg
 
I went to do a landlord cert yesterday and even my bloody U gauge was frozen solid looked real stupid tryin to defrost a bit of plastic tube to get on with a safety check lol

put a fair few drops of blue windscreen wash in the u guage, it never freezes and you can actually see it easily, don't want anyone telling me it will effect the specific density of the water !!!!!!!!!!!!!!!!!!!!!!!!
 
put a fair few drops of blue windscreen wash in the u guage, it never freezes and you can actually see it easily, don't want anyone telling me it will effect the specific density of the water !!!!!!!!!!!!!!!!!!!!!!!!

cheers i was wondering if i could do that
 
all mydrills etc were flat this morning in the cold weather, had to charge them before using to warm them up again, so had to have 3 cups of tea whilst the old charger did its stuff, not all bad then.
 
With this cold weather I have to be careful of my liquid intake.
 
Agree. Analyers test meters ect don't like the cold, bring them indoors, won't get nicked either. What is the specific gravity of screen wash? only joking.
 
all mydrills etc were flat this morning in the cold weather, had to charge them before using to warm them up again, so had to have 3 cups of tea whilst the old charger did its stuff, not all bad then.

are you finding lithium ion battery's really suffer with the cold?
 
Thanks for the reminder. Just been out and got my Megger in from the garage.
 
Status
Not open for further replies.

Similar plumbing topics

  • Locked
Mate, all you need to do is everything, to...
Replies
10
Views
5K
J
  • Locked
Jase if it's any help Anton have an agent in...
Replies
21
Views
352
B
    • Like
  • Locked
£84 plus vat is how much I spend in...
2 3
Replies
64
Views
29K
Chris Kafetzis
C
J
  • Locked
bitter? This language won't be tolerated!
2 3
Replies
66
Views
3K
Rickster123
R
R
  • Locked
You use them on old boilers, new boilers...
Replies
2
Views
5K
Puddle
P
Back
Top