Fridge magnets what a pain

[king of pipes]

Went to do a estimate to replace this old Gloworm god I hate them magnets priced for a Ideal Vouge that will sort it . 🤣 Kop

 

[ShaunCorbs]

You can guarantee some will drop when you remove the front cover

 

[Harvest Fields]

You can guarantee some will drop when you remove the front cover

I always get them To take them off. There is always at least 5 magnets that come away from the decorative part due to the heat from the casing .

 

[rpm]

Once went to a four bedroom house on a service call which was rented to four ladies. In the kitchen was a large fridge/freezer with lewd messages spelt out with magnets, one of which was "I need a big un"

Sometimes wonder what they made of the note with my number on that I left there pinned to the fridge.

 

[Harvest Fields]

Once went to a four bedroom house on a service call which was rented to four ladies. In the kitchen was a large fridge/freezer with lewd messages spelt out with magnets, one of which was "I need a big un"

Sometimes wonder what they made of the note with my number on that I left there pinned to the fridge.

The fact you didn’t get a call back should tell you.

 

[Scott_D]

I always get them To take them off. There is always at least 5 magnets that come away from the decorative part due to the heat from the casing .

Combi or system vogue?

 

[king of pipes]

Combi or system vogue?

System Scott, A Therma Q 210lt air unvented cylinder upgrade the zone valves the system pump, fit smart controls as has rad upstairs and underfloor heating downstairs. 😉👍

 

[Scott_D]

System Scott, A Therma Q 210lt air unvented cylinder upgrade the zone valves the system pump, fit smart controls as has rad upstairs and underfloor heating downstairs. 😉👍

Sounds like a nice setup
[automerge]1602275969[/automerge]
Do you wire Ideal system boilers to allow lower flow temps for heating?

 

[king of pipes]

I have fitted weather comp scott but to be honest it was more trouble than it was worth , reduce the boiler temp to 65° c , underfloor heating set to 40 °c on the mixing valve timing and temperature settings in the smart stat and let it run mate, keep it simple Nest , Hive , Drayton wiser they all work. Regards kop