Gas work | Gas Engineers Forum | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Gas work in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
for those of you contemplating assessment only you should be aware that Medium Pressure testing is back in the ACS as of 01-10-12

Having a dopey moment myself. Is that for both family 2 & 3 gasses Kirk?
 
Having a dopey moment myself. Is that for both family 2 & 3 gasses Kirk?


im only involved in domestic NG so i honestly dont know, but i would have thought MP would only have been on NG via transporters network upgrades? there is a new update to IGE/UP/1B which was donated to me by a kind gentleman, but as i havent any assessments booked i havent actually ploughed through it yet
 
Last edited by a moderator:
Is there alot of you that dont touch Gas at all.I honestly didnt think there was alot of Gas work about
 
for those of you contemplating assessment only you should be aware that Medium Pressure testing is back in the ACS as of 01-10-12

Got told let-by on medium pressure is now going to be at 7mbar and no-longer 0mb... can you confirm this Kirk?
 
Sure if I am digging deep enough I will find something to renew in Feb too as I did each course at a different time and in different years.
Not a bad thing in a way as I am getting my updates on legislation more frequently. So I know pretty much after a year already if I have to run my sealant gun anti clock wise to seal the sleeves ;). This year is my cooker year.
 
0mb (not 10mb) with release held open?
Is there a TB stating its changed to 7-10mb ?

Burglered if I know, so much information and so little time to assimilate it!

Realistically though, a let-by will be pretty evident over a wide range of starting pressures.
 
im only involved in domestic NG so i honestly dont know, but i would have thought MP would only have been on NG via transporters network upgrades? there is a new update to IGE/UP/1B which was donated to me by a kind gentleman, but as i havent any assessments booked i havent actually ploughed through it yet
i done MP last time as well the test rigs are compressed air
 
Got told let-by on medium pressure is now going to be at 7mbar and no-longer 0mb... can you confirm this Kirk?

the new let by test will be done between 7-10mb, then TT at 19mb as normal
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

Thank you for the replies. I had another...
Replies
4
Views
904
tell them 1. you have a vulnerable old person...
Replies
1
Views
621
Just to update on this- i went for Gas...
Replies
6
Views
347
Id say recal at that price....as soon as it...
Replies
5
Views
966
Back
Top