- Messages
- 2
I got a problem with my boiler,it's got some vibration when it starts to work,it doesn't fire up unless I duck tap and blank half of the air intake,I checked if its enough voltage to the gas valve its 22v dc going from pcb to it exactly what it says on the gas valve,checked fan seams to work k I will attach a video maybe someone had the same symptoms and can tell what is wrong with it please?
Now seams to fire up without the duck tape but it's making vibrations and bangging noises,like its running interrupted,the noises seam to be when air is pulled in the burner,I was thinking maybe a bad gas mixture
I did check and cleaned out the condensation recipient,I even cleaned out the heat exchanger with water as I've seen in a video,didnt fix the problem
Now seams to fire up without the duck tape but it's making vibrations and bangging noises,like its running interrupted,the noises seam to be when air is pulled in the burner,I was thinking maybe a bad gas mixture
I did check and cleaned out the condensation recipient,I even cleaned out the heat exchanger with water as I've seen in a video,didnt fix the problem