Glow-worm Ultracom 24hxi Heat Cycle Issue? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Glow-worm Ultracom 24hxi Heat Cycle Issue? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
110
Hello Forum,

I've noticed at times that my boiler is heating in a very short cycle.

30 seconds on at full flame, heating to 65c.
30 seconds off, cooling to 37C.
30 seconds on at full flame, heating to 65c.

It cycles like this for 10mins or so, then goes quiet for a period of time, then repeats.
- During this cycling the boiler is whistling a bit when it gets close to 65c and there is a bit of a clunk when the heating stops.

At other times it is heating with less intensity, for longer time periods (3-5 min), with the flame stength going up and down.
- It then stops heating for a long period.


Is this typical boiler behaviour or is something not right?
 
Doesn't sound normal depending on circumstance

Does it do this when the heatings cold
 
Hi Shaun,

Unfortunately, due to my health I rarely have the heating off.

In the past when the heating has been cold, I didn’t notice this short cycling.
- is short cycling the right terminology?.

I will try to find out during the week if we get a mild day.
 
It's expected if it only does it when the heating system is hot because the return temp is coming back warm
 

Similar plumbing topics

Ignore that air pressure sensor 🤦‍♂️
Replies
5
Views
659
B
No the installers need to come out
Replies
10
Views
2K
Hi John, yes I think you are spot on, if the...
2
Replies
37
Views
6K
I once had a similar experience with my old...
Replies
6
Views
964
A
Thanks for that. And yes, time for an engineer!
Replies
2
Views
1K
Andy Don
A
Back
Top