HALL of SHAME PHOTo`s

[Kyle87]

This ones for my gas port folio. PPE overkill!!

 

[villa_tom]

This ones for my gas port folio. PPE overkill!!

Is that flue going to be 300mm from an opening to a building? Naughty naughty

 

[SafeGasInstall]

This ones for my gas port folio. PPE overkill!!

tbh I wear ear defenders when I even drill 18mm let alone dimoned drill ,on the did wear always ears defenders + dust mask .
I wonder how long it took to drill the 4" flue hole with this eubauer hamer dril !? Lol

 

[SafeGasInstall]

LOL was waiting for that.

Edit: Then again, that was the bricky department for students so I think the wall was way out to be honest.

Hope it did not take me long to post it

 

[SafeGasInstall]

Is that flue going to be 300mm from an opening to a building? Naughty naughty

We all know we could go as near as 150mm

 

[Rickster123]

Is that flue going to be 300mm from an opening to a building? Naughty naughty

Did you fit that gas pipe behind you?! Class!

 

[Rickster123]

Couldn't be bothered plugging in the printer so here's some pics of the photos instead:

View attachment 12030 View attachment 12031

Is that before you started dying your hair grey?! :30:

 

[SafeGasInstall]

Did you fit that gas pipe behind you?! Class!

That gas pipe has been there for 10 years mate

 

[Keefy]

Is that before you started dying your hair grey?! :30:

Ouch! That was the moment I began going grey.

Also, found the original photo and I was right - the wall was out:

 

[Whyme]

I've got plenty of pictures. I'll start with these. Customer complaint about standard of workmanship. Yes that is the rear of the boiler in the second picture, the original installer didn't bother blocking up before he hung the boiler. It took two of us two days to put the install right, we had to repipe the entire heating system and run a new gas supply as he'd used the original undersized 15mm for a 30Kw combi.

View attachment 5018View attachment 5019View attachment 5020

theres a massive pic of a washing machine, that looks fine.

 

[Whyme]

This ones for my gas port folio. PPE overkill!!

your core drills crap..:smiley2:

 

[Dannypipe]

 

[tamz]

This ones for my gas port folio. PPE overkill!!

Fail

Never use a drill with arms above your head like that. If it jambs it will have your arm broke.

 

[tamz]

View attachment 12078View attachment 12079

Nice Danny. I bet the valve was there before the meter :smile:

 

[Keefy]

View attachment 12078View attachment 12079

Thought I was looking at American plumbing there at first.

What's that U piece on your gauge, I take it it's to prevent your hose kinking? Not that I have a use for my manometer atm but interested all the same.

 

[Howsie]

Thought I was looking at American plumbing there at first.

What's that U piece on your gauge, I take it it's to prevent your hose kinking? Not that I have a use for my manometer atm but interested all the same.

If it is, it's on the wrong side

 

[Keefy]

If it is, it's on the wrong side

I'm too tired to even contemplate what you're talking about but okay, if you say so lol.

 

[Dannypipe]

Nice Danny. I bet the valve was there before the meter :smile:

Yeah, I'd put money on it being there a good while longer than the meter!

Thought I was looking at American plumbing there at first.

What's that U piece on your gauge, I take it it's to prevent your hose kinking? Not that I have a use for my manometer atm but interested all the same.

That's just to go on the end of the gauge when it's not in use. To stop the liquid spilling out. Nothing fancy mate!

I think Howsie is pulling your leg! The hose isn't connected to the gauge you see!

 

[SafeGasInstall]

Fail

Never use a drill with arms above your head like that. If it jambs it will have your arm broke.

Unless you have a hilti one

 

[Sparkgap]

Wasn't this allowed back in the day though?

yes, especially with lead work: fold over the end and hammer flat! Have seen a number of places with copper pipe flattened and soldered, usually on water but occasionally on gas.

 

[helpsy]

This ones for my gas port folio. PPE overkill!!

Elf n safety.....3 points of contact on the ladder at all times! Maybe your knee counts as 1 !

 

[SafeGasInstall]

Kyle 87 is not actually doing anything there apart from posing and looking good ! We all know it

 

[Barry98]

Looking good ? Pffftttttt

 

[SafeGasInstall]

Come on , he is looking good that's with all that h&s gear

 

[villa_tom]

Kyle 87 is not actually doing anything there apart from posing and looking good ! We all know it

Looking good? I've never heard one bloke tell another bloke he looks good

is there some thing your not telling us stan?????