R
Rickster123
You been working away Neil?! :39:
-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
HALL of SHAME PHOTo`s
- Thread starter Barry98
- Start date
-
- Tags
- None
You been working away Neil?! :39:
Got to try to fit in time to sort pipework on a megaflow at a house bash where the installer had the same idea.
Customer has paid for one fix fee from manufacturer, they think it is thermostat but as they cant change it. (At a cost of £220 ) hes also got to pay to have it moved first.
That picture brings back memory's , I used to subby for kingspan/tribune years ago I have seen that so many times, when the cylinder is indirect and the immersion heater is a back up it's potentially not a massive problem , when it's direct and the stats are tosh it's a rather big job.
L
LPC
Install by a very large UK company. Spot the 2 glaring things. Couldn't quite believe what they had done here.
Not to mention all pipework running through loft, none insulated.
http://i.*********/MIYBdAh.jpg
Not to mention all pipework running through loft, none insulated.
http://i.*********/MIYBdAh.jpg
T
tamz
Sawed part of the truss out, blow off rising then out, no screws in flue bands
L
LPC
Got it with the first 2. They sawed all of the truss out, save 2 little stumps either end.
E
Ermintrude
Nice I thought it was the peeling valliant sticker
L
LPC
Surprised they got it that far with the super mega glue they used to stick those labels on with.
T
tamz
The house won't fall down as luckily the outriggers will support it too.
I'd like to see their reaction if she complained about it and wanted it fixed :lol:
I'd like to see their reaction if she complained about it and wanted it fixed :lol:
C
Ch4 plumbing
Was that a £1300 Install I keep hearing about?
P
Paulplumb
Right which one of you did this?
kitchen fitter ????
M
mad_angler1
My bad [emoji12]
Clint 1979
Gas Engineer
Cowboy builders.......with shares in speedfit!
Nice bit of soldering too........ooh err!!
Nice bit of soldering too........ooh err!!
R
R.Oak
Who needs a heating manifold?
Was asked to rip out this mess and fit a UFH Manifold. Didnt even have its own pump was running off the same circuit as the radiators
Was asked to rip out this mess and fit a UFH Manifold. Didnt even have its own pump was running off the same circuit as the radiators
H
happyflyer
I'm Spartacus
H
happyflyer
Who needs a heating manifold?
Was asked to rip out this mess and fit a UFH Manifold. Didnt even have its own pump was running off the same circuit as the radiators
A work of art, should be in the museum 10 out of 10 for trying, look the same number of connections on the left and the right
Last edited by a moderator:
Hope the iron’s not gonna get too close to the pipes…
E
Ermintrude
I have almost the Same at home
H
happyflyer
No you don't yours is much worse than this Ermi.... you should have said "I have almost the same shame at home." 😛arty:
Just looks ridiculous!!!!
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.