Heat Shield any infomation?

[Ray Stafford]

you can mark it up and still be quids in

'fraid not. This customer is tighter than a ducks @rse in a thunderstorm.

 

[lame plumber]

well let him find it himself

 

[kirkgas]

'fraid not. This customer is tighter than a ducks @rse in a thunderstorm.

Well surely it's "out of stock"

 

[AWheating]

sell him a roll of 3ft code eight lead and a dresser.

 

[Ray Stafford]

well let him find it himself

Well surely it's "out of stock"

sell him a roll of 3ft code eight lead and a dresser.

Not sure that you guys have quite got the hang of merchanting. Our job is to find the product, even when it doesn't exist.

 

[lame plumber]

if they dont meet your minimum spend rfequirements, why bother, I dont

 

[Ray Stafford]

if they dont meet your minimum spend rfequirements, why bother, I dont

Big spenders still sometimes ask challenging questions.

 

[Barry98]

Love this thread

 

[Ray Stafford]

Love this thread

But can you help with the source of the elusive "heatshield" or are you just going to add more unhelpful tosh about butchering a closure plate?

 

[Barry98]

Don't get a dog and bark yourself , I believe that's juice to me ?

 

[Ray Stafford]

Don't get a dog and bark yourself , I believe that's juice to me ?

Do you mean "deuce" dear boy?

Advantage Ray.

 

[lame plumber]

as mentioned earlier everyone either uses the old closure plate or some more expensive zinc sheet, thats all that is required by the regs. Being that modern condensing boilers dont produce a hot exhaust per se, heat shields arent really an issue now, as they arent required coz your guttering and eaves wont melt anymore.

 

[Barry98]

But when the guttering has those little air holes in you have to cover them

 

[Ray Stafford]

as mentioned earlier everyone either uses the old closure plate or some more expensive zinc sheet, thats all that is required by the regs. Being that modern condensing boilers dont produce a hot exhaust per se, heat shields arent really an issue now, as they arent required coz your guttering and eaves wont melt anymore.

Brilliant. If you wouldn't mind dressing that up in posh language, printing it out on 100gsm paper, and binding it into a folder, we can send it to my customer, with a £1200 invoice for technical consultancy.

 

[lame plumber]

But when the guttering has those little air holes in you have to cover them

lost me now?

 

[Ray Stafford]

lost me now?

me too. Is it a yorkshire thing?

 

[snowhead]

lost me now?

Leaking cast iron gutter???

 

[lame plumber]

doesnt need protecting as it aint plastic, and ray you owe me 10%, so is it you or williams I make the invoice out to?

 

[Ray Stafford]

doesnt need protecting as it aint plastic, and ray you owe me 10%, so is it you or williams I make the invoice out to?

Commission works the other way round Jon. You pay me 10%.

 

[Barry98]

Not where he's drilling but I want to cover those air holes running along the eaves as the flue is going to be about 35mm below them

 

[kirkgas]

Not sure that you guys have quite got the hang of merchanting. Our job is to find the product, even when it doesn't exist.

No we have the hang of not working for nowt, haha

 

[kirkgas]

Not where he's drilling but I want to cover those air holes running along the eaves as the flue is going to be about 35mm below them

Best way to cover the strip vent is to use a flat piece of PVC from the window suppliers place

 

[turbotorch]

Regarding the heat issue what about a heat resistant spray paint? I need to do a wall hung oil boiler with flue close to soffit.

I haven't asked grant so will give them a call..