I am sorry if there is an introductions area, I didn't see one, nor did the intro message I received mention one.
I am a plumber for a large plumbing and heating firm. I also do some heating work. I do almost all service work as well as all of the drain snaking calls.
At this point you're probably thinking, "Get the heck out of here you American.". I came here for one question which few if any American plumbers and answer.
Who makes the best lever bender? I see that all of the videos about bending copper pipe are made by you Brits. I have a draper 34212 lever bender which works well since I have fixed the inherent problems, but the movable arm is slightly bent towards the 1/2"/15mm side from bending larger pipe.
If it's a crap shoot I understand, you guys probably have more "brand names" not made in Asia than we do.
I am a plumber for a large plumbing and heating firm. I also do some heating work. I do almost all service work as well as all of the drain snaking calls.
At this point you're probably thinking, "Get the heck out of here you American.". I came here for one question which few if any American plumbers and answer.
Who makes the best lever bender? I see that all of the videos about bending copper pipe are made by you Brits. I have a draper 34212 lever bender which works well since I have fixed the inherent problems, but the movable arm is slightly bent towards the 1/2"/15mm side from bending larger pipe.
If it's a crap shoot I understand, you guys probably have more "brand names" not made in Asia than we do.