Hive keeps losing signal | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Hive keeps losing signal in the Plumbing Jobs | The Job-board area at Plumbers Forums

sammathias

Plumbers Arms member
Plumber
Gas Engineer
Messages
928
I have a hive installed on my heating system and every now and again it will show no signal...I've changed batteries and moved position within feet of the reciever but yet still it loses signal sometimes. Worked flawlessly for a year. Any ideas?
 
No Murdoch but you could be onto something...maybe interference you say?

You need a wifi analyzer ....... you can't run them on ios devics

I use Acrylic Wi-Fi Home (free) on my laptop - it will show all the wifi set ups around and which channel they are on.

If you can see that your wifi is on the same channel , then move it away from your neighbours wifi and see it this helps.

Also this "tool" can tell you how strong your wifi signal is ....... so move your laptop around the house ...

Got to be worth a try.
 
Don’t forget to come back to me if you need the hive booster. It was a known problem with the hive that’s why they were giving them out for free.

It's worked fine for a year or so...looking at local devices using WiFi I've notice a wireless printer so got a funny feeling that could be linked to my signal trouble.
 

Similar plumbing topics

Is it a heat only boiler?, you say a new pump...
Replies
1
Views
582
Well, I don't really know. I was thinking the...
Replies
4
Views
933
I
Yes press the button until there are 2 lights...
2 3
Replies
53
Views
6K
Deleted member 120897
D
C
I’m not posting here to agree to do/looking...
Replies
1
Views
847
Again, ongoing thanks. I'll have to get to my...
Replies
18
Views
2K
Back
Top