Hot waste pipes !!!

[rpm]

Top man , I will send you an order in the morning lol

Had as in had to use, sorry mate wish I could help but will check in the lock up to make sure.

 

[Alert]

Consider terrain waste aswell they do different ranges but even the standard stuff has a higher temperature rating

 

[ShaunCorbs]

Consider terrain waste aswell they do different ranges but even the standard stuff has a higher temperature rating

only rated to 80 i think like most sw/pf

 

[townfanjon]

much cheaper than hot works unless you got a press gun?

Nah nearly bought one but I am too tight lol

 

[ShaunCorbs]

Nah nearly bought one but I am too tight lol

you can hire them you know

 

[townfanjon]

you can hire them you know

Still too tight lol

 

[ShaunCorbs]

Still too tight lol

don't forget to add the tool cost onto the job for the Vulcathene

 

[townfanjon]

don't forget to add the tool cost onto the job for the Vulcathene

Yer defo , TBH I have no idea who sells it up here , I will have a ganders later or ring them in the morning

 

[ShaunCorbs]

Yer defo , TBH I have no idea who sells it up here , I will have a ganders later or ring them in the morning

Where are you in this big world ?

 

[rpm]

don't forget to add the tool cost onto the job for the Vulcathene

A Yorkie wont forget to do that. lol

 

[townfanjon]

Center of the universe / Gods own .... Yorkshire lol

 

[ShaunCorbs]

Center of the universe / Gods own .... Yorkshire lol

Bss and the link I posted sell them I would recommend both

 

[townfanjon]

Many thanks, I think there is a BSS somwhere in Leeds , but knowing Leeds , it may be easier to get some posted lol

 

[ShaunCorbs]

BSS INDUSTRIAL UNIT 5 CITY PARK IND ESTATE
GELDERD ROAD
LEEDS
LS12 6DR

01132 032203

bss also deliver

also if you ever needed they hire press guns

 

[townfanjon]

BSS INDUSTRIAL UNIT 5 CITY PARK IND ESTATE
GELDERD ROAD
LEEDS
LS12 6DR

01132 032203

bss also deliver

also if you ever needed they hire press guns

Many thanks yet again , at least thats my side of Leeds , its ok is Leeds but its full of "dirty leeds " fans .

 

[ShaunCorbs]

Many thanks yet again , at least thats my side of Leeds , its ok is Leeds but its full of "dirty leeds " fans .

i know what you mean,

 

[REDSAW]

pity you cant blend it with cold before discharge!

 

[ShaunCorbs]

pity you cant blend it with cold before discharge!

but wouldn't that be classed as a wastage of water ?

 

[townfanjon]

pity you cant blend it with cold before discharge!

Its funny you should say that , I have only just found out today the steriliser discharges at around 90 degrees so untill its done I am going to advise them to do that . The one problem with this is the last section of the pipe is actualy in a wall cavity, dont ask ...... Builders Pfftttttttttt

 

[REDSAW]

but wouldn't that be classed as a wastage of water ?

depends if your on a meter
how about a reciever tank to discharge into..cools before then pushed out by hot discharge at lower temp, like a mini hw cistern or into a rad!!

 

[ShaunCorbs]

depends if your on a meter
how about a reciever tank to discharge into..cools before then pushed out by hot discharge at lower temp, like a mini hw cistern or into a rad!!

That's not a bad idea I like it