Ideal HE 35 Boiler Problem | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Ideal HE 35 Boiler Problem in the Boilers area at Plumbers Forums

Status
Not open for further replies.
G

Gary2112

I have a problem with my boiler its about 5 years old. I currently have the central heating off and just running on hot water. The boiler has always cut in from time to time to pre heat some water so its avilable straight awau when you turn the tap on and works fine. The problem I have now is doing this much more often say 4 times an hour and confusingly the raditators are getting warm. I have checked I have no hot water leaks or dripping taps. I have watched the boiler run and the t code lights during the pre-heat but also the central heating pressure gauge flicks which suggests to me the heating water pump is alson running. The raditators only get slightly warm. I thought it may be gravity circulation pulling heat out of the boiler and I have closed the valves on the upstairs raqdiators only to find that the downstairs raditators are warm. Any ideas known faults? Could the pump be running? The central heating is off!
 
Status
Not open for further replies.

Similar plumbing topics

That means you have a leak as the system...
Replies
9
Views
829
200% won’t be the reason the cylinder isn’t...
Replies
10
Views
1K
Hi John, yes I think you are spot on, if the...
2
Replies
37
Views
6K
I don't believe moving the manual lever over...
Replies
5
Views
515
Is your boiler the 'Ideal Logic Heat 12' (i.e...
Replies
1
Views
852
Back
Top