ideal logic 30 combi boiler F1 fault

[newagegasman]

They had a few flaws, any information you wanna know message me i know these boilers in side out.

 

[Gerryx]

They had a few flaws, any information you wanna know message me i know these boilers in side out.

Hi, I have one of these Boilers,and am getting the flashing F1. I have a refill loop fitted, I refill up to between 1.5 and 2 on the dial. Boiler starts working, then after a few hours the Flashing F1 is back. I have good water pressure at all taps, I have also made sure there is no air in the rads. They all work when F1 is not flashing. any Ideas. You help would be greatly appreciated.

 

[Dotty]

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

[DLMURL="http://www.co-gassafety.co.uk/deaths.html"]CO Gas Safety[/DLMURL]

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html