Ideal logic + combi 30 | Plumbing Jobs | The Job-board | Page 3 | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Ideal logic + combi 30 in the Plumbing Jobs | The Job-board area at Plumbers Forums

This post beggars belief, unless I have missed something, no water is getting through the magna clean valve. ,!!!!! Start there .
Both magna clean isolation valves do open...... the pictures shows the top valve closed, when opened water be flows out of the magna clean, the bottom valve is in the open position and actually opened but no water flows out.... I have checked it with the magna cleaned removed ....

81669705-8D5F-40C1-902F-73855DA033FC.jpeg
 
Hey did they come out yet? Could the diverted body inside be jammed to dhw? Therefore stopping flow round heating circuit?
I was thinking that but I removed the DV motor and manually pushed in the pin fully but still no different....... the customer is not prepared to call out Ideal so we may never know?????
 

Similar plumbing topics

Unfortunately most household insurance...
Replies
16
Views
2K
F
  • Question
Thanks I'll try that. Appreciated
Replies
6
Views
1K
FrankMcg
F
Are you Gas Safe Registered? If not please...
Replies
2
Views
537
T
time to save up and get a baxi 800 range
Replies
5
Views
2K
Back
Top