JOTM comp September | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

  • Thread starter Barry98
  • Start date
  • Replies 86
  • Views 8K

Discuss JOTM comp September in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

Barry98

Right we're going to give this a go , photos must be of a job YOU have done there are three judges there decision is final , we kindly have a independent donor of the first prize thank you to Ray Stafford the prize is not exchangeable returnable etc .

Please load pictures here and stay on topic I will announce the winner on the last day of the month.

Let the games begin
 
Don't tell the tilers we started this they'll be accusing us of stealing ther ideas
 
Iff only I knew how to download pics, and yes I am sticking to that excuse.
 
The prize from this month is a choice of either a Rothenberger torch, or a set of 15mm/22mm/28mm pipe slices the winners choice now that must be worth some good pics I know i will be entering.
 
Which job to post up? That's the question!


Sent from my iPad using Tapatalk HD
 
The prize from this month is a choice of either a Rothenberger torch, or a set of 15mm/22mm/28mm pipe slices the winners choice now that must be worth some good pics I know i will be entering.

That's an excellent prize!

Is there a booby prize for worst job?!
 
Yeah a months Infraction and barred from the arms pictures pictures pictures come on here's mine not the best but its the last one I'll be doing this month

ImageUploadedByTapatalk1348250218.925452.jpg
 
065.jpg749.jpgS058.jpg059.jpg062.jpg060.jpg066.jpg020.jpge017.jpg751.jpg737.jpgnt from my GT-I9100 using Tapatalk 2

For any tilers looking at this the 'thinish' cuts on the floor could not be avoided and alot of planning went into the setting out, the other way was worse as the room has two doglegs, also a lot of features to contend with.
 

Attachments

  • uploadfromtaptalk1348252295571.jpg
    uploadfromtaptalk1348252295571.jpg
    20.5 KB · Views: 178
Last edited:
Top class job Phil, looks fantastic.

This is my latest plumbing and tiling effort:

netynyte.jpg


qene4yhe.jpg


uzysunag.jpg


eha2ynu3.jpg


sybytaja.jpg


3y6yna3e.jpg



Sent from my iPad using Tapatalk HD
 
Last edited by a moderator:
Excellent work there
Can we clarify something bod is this on plumbing or tilling or anything?
 
Nice work also TB, always interesting to see other members installs. We all tend to mount out towel rad fixing brackets in different places. Yours looks weird to me (not wrong!) as mine will do to you, I've always put then 2nd row from top/bottom and more or less as far out as they will go leaving 5mm gap.

Customers seem to like it this way as they can force more towels behind.
 
Nice work also TB, always interesting to see other members installs. We all tend to mount out towel rad fixing brackets in different places. Yours looks weird to me (not wrong!) as mine will do to you, I've always put then 2nd row from top/bottom and more or less as far out as they will go leaving 5mm gap.

Customers seem to like it this way as they can force more towels behind.

Yeah, tbh it depends on the rail as to where I put the mounts. This one was actually already there and customer wanted to re-use, and it was pretty awkward. Some of the mounts supplied with curved rails (not all) have to be fitted at a particular width to sit properly flush with the wall.

Thanks for the kind comments guys.


Sent from my iPad using Tapatalk HD
 
Last edited by a moderator:
Excellent work there
Can we clarify something bod is this on plumbing or tilling or anything?

any job you have done tilling , wood work , plumbing steel copper oil lpg etc anything not stuff like buildings landscape you lass ( just email me those for approval)
 
sorry it should of read your lass (just email me those for approval)
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
I forgot to say. All our radiator thermostats...
Replies
4
Views
2K
great, thanks for sharing, really difficult to...
Replies
2
Views
2K
yes , the meter for the immersion heater. Not...
2
Replies
30
Views
6K
R
    • Like
  • Locked
That answers me question, Well done you.
2 3
Replies
54
Views
8K
Whyme
W
J
  • Locked
I thought that's what was likely. Nice to hear...
Replies
18
Views
2K
Back
Top