Keston Celsius 25 - incorrect gas rate

[tomo]

Keston Celsius 25. The gas rate is over 10.5% less then manufacture instruction. MI says + or - 5%. Burner pressure is more than 1mbar over MI. Manufacture says that the burner pressure is manufacture preset, so should I try to reset it and how to do that, the instruction does not show how to set burner pressure. The combustion was good and all boiler working fine. I haven't got experience with this boilers and I am new in the industry. Please give some ideas.

 

[village idiot]

i doubt croppie will allow advice of this nature on an ''open forum''

 

[Dotty]

i doubt croppie will allow advice of this nature on an ''open forum''

correct.

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html