Metabo or makita Core Drill | Plumbing Jobs | The Job-board | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

  • Thread starter gallstone
  • Start date
  • Replies 25
  • Views 19K

Discuss Metabo or makita Core Drill in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Just used my new Marcrist DDM1 and PC850 cores, they're rather brilliant - 1 course of breeze took 15 secs, a course of engineering brick took about 75 secs. It wasn't out of its box more than 5 mins. Highly recommended. Used to use Bosch 4kg SDS hammer stop & Edge diamond cores, they took ages - Not anymore.
 
Status
Not open for further replies.

Similar plumbing topics

3
  • Locked
Cheers Richard details in e-mail. Very best rgds
Replies
15
Views
6K
erpkid
E
Yes, I did see that the matter of putting Mag...
Replies
18
Views
4K
Thank you for the recommendations. I will...
Replies
4
Views
3K
3
  • Locked
Re: New packaging for summer 2012 - Diamond...
Replies
1
Views
1K
Guest123
G
3
  • Locked
Re: Help! - As a PLUMBER we need your help to...
Replies
16
Views
4K
365drills
3
Back
Top