P
pauljs
Hi everyone,
I have a Mira Enduro "Universal" 1.5 bar double ended pump. the wife turned on the shower this morning and nothing happened (she had a shower with no power).
I am tasked with troubleshooting and have read the appropriate guide.
When I tried the shower it worked fine a little later on
I have noticed a startup and shutdown squeek and the recording is available but the forum will not let me post it. I will try to post it in a reply to this.
Can anyone tell me if the noise is normal for a 4 year old pump and if not what the troubleshooting steps might be? Also I am not sure if the noise is related to the intermittent failure to start but it does seem likely.
Many thanks
Paul
I have a Mira Enduro "Universal" 1.5 bar double ended pump. the wife turned on the shower this morning and nothing happened (she had a shower with no power).
I am tasked with troubleshooting and have read the appropriate guide.
When I tried the shower it worked fine a little later on
- I left it running on C 5 mins H+C 5 mins H 5 mins and then stopped restarted it a few times - worked each time
- I used a magnet to test the reed switch on each side and they are both working (now at least).
- It then failed to turn on once for me but its now fine again.
I have noticed a startup and shutdown squeek and the recording is available but the forum will not let me post it. I will try to post it in a reply to this.
Can anyone tell me if the noise is normal for a 4 year old pump and if not what the troubleshooting steps might be? Also I am not sure if the noise is related to the intermittent failure to start but it does seem likely.
Many thanks
Paul
Last edited by a moderator:
