Mr combi course any good? | Plumbing Courses | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Mr combi course any good? in the Plumbing Courses area at Plumbers Forums

obseen16

Plumbers Arms member
Plumber
Gas Engineer
Messages
835
hi all,

well im always looking to expand my knowledge and sadly have not alot of cash left for courses, i spotted this mr combi course a while ago and it seems like i might just learn a few new things and its cheap. i was just wondering if anyone has been on this course and found it good/bad.

im always booking onto the manufacturers courses but i get the impression this mr combi guy goes into alot more detail about things.

hope someone can give me some feedback before i book on.

thanks all.
 
Any knowledge is good knowledge. Never done Mr combi stuff but know a lad who did. Pretty basic but useful info. Bit about how to screw more bucks for the bang rubbish.
Get to know the boiler reps. They will get you on any course they offer for free.
 
Would have thought their is nothing there that you can not get on the net and than asking any questions here

As said go for a manufacturers course,ie ,why go on a worcester approved course,when you can go one one direct with worcester......or who ever

However the cost is not bad and you may get some down to earth stuff but if you are going to do it,do not be afraid of asking questions,if you are not sure of something,that way, you are more likely to get your monies worth,to many people go on courses and are afraid to ask questions,in case it may be silly and also that leads to not understanding items moved on to,so you find yourself totally lost and picking up a fraction of what you should.
You will probably never see anyone in the class room again,what's it matter what they think,what matters is you a more confident on your next combi job

imho
 
just did a fault finding course with vokera last week, only me and the trainer were there for the whole day, tell ya what considering it was vokera the quality of the info i got was really good. its tripled my knowledge of fault finding. as luck would have it ive had 3 boiler breakdowns since the course, and managed to find the faults within a few mins. whereas before it would have probably taken me an hour on technical helplines to find it,

and the best part is......... It was free!
the worst part was.......... no freebies but thats ok considering what i learnt.
 

Similar plumbing topics

If you're still looking try this - (Admin...
2
Replies
32
Views
6K
Again, ongoing thanks. I'll have to get to my...
Replies
18
Views
2K
OK that's good information. Many thanks.
Replies
19
Views
3K
P
Mr Speaker: I'm tempted to draught a sarcastic...
Replies
22
Views
4K
plus one for the baxi course obviuously done...
Replies
6
Views
136
Back
Top