New heating controls and wiring

[jaydebruyne]

I just need confirmation I'm doing this right as per my drawing..

Not sure if this is clear enough.. but...

I've replaced an old mechanical timer and room stat and had to rewire as custard wanted them relocated.

I was trying to do this without a wiring centre and it kept blowing the fuse lol

So... this is for a potterton heat only boiler serving heating only. They have a separate multipoint for hw.

I need to link permanent live to 1 on the programmer?
3 from programmer goes to 1 on room stat.
3 from room stat goes to switched live on boiler.
All permanent live for boiler and programmer you get from switched spur?

I'm pretty sure this is right but would like opinions please...

Cheers

 

[ShaunCorbs]

Yes that's right but can't understand why you were blowing fuses

 

[jaydebruyne]

Yes that's right but can't understand why you were blowing fuses

I think I've messed up somewhere.. I was only blowing fuses when I linked live and 1 on the programmer..

 

[ShaunCorbs]

I think I've messed up somewhere.. I was only blowing fuses when I linked live and 1 on the programmer..

Depends what prog you got somtimes you don't need to link them

 

[jaydebruyne]

Depends what prog you got somtimes you don't need to link them

Drayton LP111 .. I'm sure I read in the diagrams on the mi's that I need to link them..

 

[ShaunCorbs]

Drayton LP111 .. I'm sure I read in the diagrams on the mi's that I need to link them..

Yes you do there the only ones I fit

 

[leesparkykent]

looks good to me.

 

[jaydebruyne]

Yes you do there the only ones I fit

I'll go grab a wiring centre from nailfix tomorrow and finish up. Thanks Shaun

 

[jaydebruyne]

looks good to me.

Cheers Lee. . You're a sparks?

 

[ShaunCorbs]

I'll go grab a wiring centre from nailfix tomorrow and finish up. Thanks Shaun

Tbh mate if you have wired it up like that without one and your still blowing fuses the only thing I can think of other than a fault is you have maybe crossed a wire / misplaced one

Also don't forget your neutral on your stat

 

[jaydebruyne]

Tbh mate if you have wired it up like that without one and your still blowing fuses the only thing I can think of other than a fault is you have maybe crossed a wire / misplaced one

Also don't forget your neutral on your stat

I know where I've messed up.. I extended the 3 core with a choc box. So the black (switched live) became earth. I've wired up the switched live to earth on the programmer lol DOH

 

[ShaunCorbs]

I know where I've messed up.. I extended the 3 core with a choc box. So the black (switched live) became earth. I've wired up the switched live to earth on the programmer lol DOH

That's the cookie least you know

 

[jaydebruyne]

That's the cookie least you know

So annoying, have to go back tomorrow grrr

 

[ShaunCorbs]

So annoying, have to go back tomorrow grrr

It's not once you see how far you have come live and learn mate, don't forget to mark the wires (sleeve in brown) for non coloured wires / changing (neutral to live etc)

 

[jaydebruyne]

It's not once you see how far you have come live and learn mate, don't forget to mark the wires (sleeve in brown) for non coloured wires / changing (neutral to live etc)

Yeah I will do.. Cheers mate.

 

[ShaunCorbs]

Not a problem

 

[leesparkykent]

Cheers Lee. . You're a sparks?

Yes mate. glad you found where you went wrong.

 

[jaydebruyne]

It was as I thought. I didn't use a wiring centre in the end and got it all up and running in the end

 

[ShaunCorbs]

It was as I thought. I didn't use a wiring centre in the end and got it all up and running in the end

good to hear