New house.Vaillant eco tec plus Danfoss TP5000si | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss New house.Vaillant eco tec plus Danfoss TP5000si in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
78
Only showing temp setting on right and 2 dots on left (presume they're the dots between where the time would be)
Changed batteries twice
Pressed reset and a time (11:00) very briefly displays when you first release, but then disappears.
Followed instructions to set the date-nothing
Is it possible that the PROG button's not working?

Wasn't communicating with the unit under the boiler at first, but sorted that so now at least using up/down buttons does switch heating on/off, although it's "strange"
This am pretty cool in the house but had to turn it up to 19c to get the boiler to fire, but then it switched off and flame sign on stat not showing after 5 mins and rad's were barely warm.
Increased to 20c-same thing
21c seemed to do the trick, but it took at least 20 mins before the boiler fully fired up and got the circulating water temp up to 70c and radiators got hot. Before that it was hovering around 50c.
New house and not familiar with the boiler either. It's a Vaillant eco tec . Just been serviced by prev owner and have paperwork .
Operating pressure is fine.
Hot water is fine.

Thanks for any help.
 
Cheers Gasmk1. New one already on the cards. If we get the same model, will it pair up OK with the receiver unit (is that the correct term?) under the boiler or will we have to get that changed? Saw the Vaillant stat's on their site . Will have a look.
 
Cheers Gasmk1. New one already on the cards. If we get the same model, will it pair up OK with the receiver unit (is that the correct term?) under the boiler or will we have to get that changed? Saw the Vaillant stat's on their site . Will have a look.
dont know if it will pair up you will need to check instructions
 

Similar plumbing topics

I
  • Locked
I think it's plugged into the front of the...
Replies
30
Views
20K
I think its a pressure loss issue, it’s...
Replies
5
Views
3K
S
  • Locked
based on the last few comments above I'm now...
2 3 4
Replies
81
Views
24K
Dotty
D
R
  • Locked
Hey all, apologies for the long post: I've...
Replies
0
Views
4K
richardc1983
R
S
  • Locked
Close the windows. Would doubt its the...
Replies
4
Views
2K
Back
Top