Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss non condensing high efficiency boiler in the Boilers area at Plumbers Forums
Hi RayThank you for your reply, just to clarify the reason of my question . I've see the boiler that can perform as previously mentioned. It is not imported in UK but I can get old of one easily.It is expensive but not much more of some top of the range normally available boilers.Speaking with people in general every one says that only condensing boiler are to be installing in UK. I found that a false information. the MI :at max nominal power 93.2% efficiency,flue loss 4.9%, loss at the body 1.9%. exhaust gas temperature 108cThe heat exchanger is the tube and shell type all in copper.Will I be allowed to fit one in UK?
Put us out of our misery and say what the make and model is of this wonder boiler!The MI :at max nominal power 93.2% efficiency,flue loss 4.9%, loss at the body 1.9%. exhaust gas temperature 108c
summat for nowt, lovin it, even if its only 5% lol
cheers tamz, a privilege.You've turned green :smile:
Isn't a condensing boiler 105+% efficient ?
That is an impossibility. Most are running nowhere near their stated efficiencies (calculated from a bench test) and only slightly more efficient than the ones they replaced.
i totally agree 3 boilers i serviced last weekThat is an impossibility. Most are running nowhere near their stated efficiencies (calculated from a bench test) and only slightly more efficient than the ones they replaced.
looks heaplike good luck getting spares for itThe OP can't be bothered to tell us which boiler he is talking about, but the Homologation Number was sufficient!
[DLMURL]http://www.mcncaldaie.com/BluGas.pdf[/DLMURL] (it's in Italian!)
It's not listed on the Sedbuk database.