i 've taken a back boiler out connected to a pre fabricated flue,the connection from the bbu hood was selkirk twin wall ,this part fell away when i pulled the back boiler out,what is the best way to make good,with an out set ,closure plate etc,the builders opening is huge.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss outset gas fire in the Gas Engineers Forum area at Plumbers Forums
Similar plumbing topics
Yes, all that was in place. Just had no idea...
- Jennie
- Gas Engineers Forum
- 7
- 176
- Latest:
- Jennie
Gas engy I’m afraid
- Jcuk691
- Boilers
- 1
- 738
- Latest:
- ShaunCorbs
Q1. Do new gas fires usually come supplied...
- bureaucrazy
- Gas Engineers Forum
- 3
- 3K
- Latest:
- saghir
Depends on the size of the builders opening...
Hi Brambles,
Well the gas engineer came round...
- Chatty75
- Gas Engineers Forum
- 4
- 2K
- Latest:
- Chatty75