Pizza, pizza, Olives.... Brass, copper. Whats the difference. | Plumbing Jobs | The Job-board | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Pizza, pizza, Olives.... Brass, copper. Whats the difference. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Saliva is a great assembly lube for o-ring interfaces too. Biodegradable, non-toxic and non-corrosive (although probably best to not let the customer see :) ). I used it on a shower cartridge last week and routinely give o-rings a good suck (ooh 'er missus) when servicing my diving regulators (it's actually recommended as an option in the service manual for my regs).
 
Sorry I thought I had stumbled into a Carry on film script, Matron !!!


Sent from my iPad using Tapatalk HD
 
system3;305171 and for those muppets that use PTFE tape instead of a washer said:
Shake my hand because i'm big and bad tempered :lol:

Everyone (well most of us older ones) have been guilty of that one at some point. Nothing worse than trying to find a fibre washer in a dark van. Done properly it will never leak.
 
I also use PTFE to bolster an old washer on traps when removing and replacing if I haven't got one to hand (or can't be bothered to search)
 
Status
Not open for further replies.

Similar plumbing topics

L
  • Locked
are you sure you tightened it up lol :21:
Replies
27
Views
14K
There's nothing wrong with external boilers...
Replies
4
Views
2K
B
  • Locked
Many thanks, good info.
Replies
2
Views
9K
Blackspaven
B
I
  • Locked
Id have a rad in the basement loosened and the...
Replies
17
Views
5K
newcastle phill
N
  • Locked
On large systems there will be a drop after 2...
Replies
24
Views
3K
Back
Top