Shaun theres bit to much advice been posted on the open forum bud
-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Potterton boiler mystery...
- Thread starter Santajosep
- Start date
- Status
ive been in two minds on this one mate, will keep an eye on it
What gas do they use in spain ? G20 probably not bet its bottled gas theres a clue maybe
The boiler is set up for propane, which is what we're using.
If it wont fire up and run how can it be set up? chances are thats the problem you need a engineer who knows their stuff not a part swaper cheers kop.
Er, it does fire up. I have said that it fires up.
but then it goes out
Yep.
5 - to 20 seconds is no good get yourself a Gas engineer is my advice
Not a he 🙂
im sure i could find a catapult if that helps
My bad. Sorry. You know what they say about presumption.🙄
You have already had more advice than you should of had on a open forum Santajosep, and its time to say get a compent fully qualified gas engineer to sort this problem out regards kop
Gremlins?
Thank you for your extremely helpful comments. The engineers who have been studying the problem are fully qualified, competent and very experienced. Potterton have spoken to one of them and, while Potterton can't help or advise because we're not in the UK, they have admitted they are also confused by the problem.
Freaking great film. Pretty dangerous to have those little buggers around a plumbing issue...
It was something people used to say when there was no explanation for something.
That Gremlins had caused it through mischief.
My thought would be to check flue and/or condense run aren't blocked. Problem with flue would cause hear symptoms. Problem with blocked condense often comes up with a gas fault code. Good luck. Look on the bright side, I bet the weather is better There!!
Flue already checked and not blocked.
Well if you have swapped everything on the Boiler for parts that work on another Boiler, it sounds external. (I presume you swapped all parts concerned with ignition and flame recognition).
You said it is not Polarity, I presume it is well earthed ?
My advice is to bin it and start again.
I do know Engineers who work for manufacturers who have told me similar tales and they accepted that Gremlins were to blame and swapped the complete boilers.
- Status
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
