potterton powermax he 150

[E4gas]

I need to change it , not sure best replacement for it ,,
thinking worcester 440 high flow

 

[Rickster123]

Where is it mate? In its own cupboard? I'd go wall hung.

 

[Atouchofgas]

What space do you have? Maybe chb & unvented

 

[E4gas]

Where is it mate? In its own cupboard? I'd go wall hung.

Yep ,, in cupboard on landing , out side wall ,, looking for good flow rate as there's 3 bathrooms

 

[E4gas]

What space do you have? Maybe chb & unvented

Not much space for boiler & unvented . Plus cost involved

 

[Rickster123]

3 bathrooms off a combi? Vaillant 937 would be my only choice. Fitted a couple, big lump but very good unit.

 

[bigads28]

Thats a good shout on the 937. I'd go for that or the biggest highflow.

 

[Ermintrude]

937 ok till its reserve gone. Why not tie 837 onto a valliant squat unvented.

 

[Rickster123]

937 ok till its reserve gone. Why not tie 837 onto a valliant squat unvented.

Coz he ain't got room...

 

[Ollieg]

use a 937 with a 22mm blending valve. Hw temp on boiler can nice and high with a blended outlet at say 50c. That should last a while untill store runs out. Also like the highflows with the same set up.

 

[Roger Welton]

I'd be looking to find room for a unvented and system boiler, with 3 bathrooms.

 

[Ermintrude]

Coz he ain't got room...

Can fit one in ac with boiler ? Unless it's only 1.6m deep. Full height nee bova

 

[Mike Jackson]

Only one combi boiler that I'd even remotely consider with three bathrooms.

Viessmann - Vitodens 222-F

 

[E4gas]

Only one combi boiler that I'd even remotely consider with three bathrooms.

Viessmann - Vitodens 222-F

Nice boiler , I forgot about this model , should no better as I went on the Veissman course