Replacing synchronous motor.

[sticky01]

Hi All

Sorry to bother you, but I am replacing the synchronous motor on a Honeywell motorized valve. I've bought the universal synchronous motor that Tool Station sell.
One of the two wires from the original goes to a connecting type block on the valve. There are three other wires going into this same connecting block.
Am I right in thinking that this won't come undone, but that I should cut it and connect it to one of the new wires, from the new synchronous motor using the crimp connectors that they have supplied.
Hope this makes sense.

Sticky

 

[Mike Jackson]

Just cut the wires to the motor and use the crimps.

 

[sticky01]

Thanks for a fast reply.

Sticky

 

[stevetheplumber]

block up any hols in the airing cupboard floor cos thats where the little screw will go when you drop it

 

[sticky01]

He he, done it, didn't lose any screws:whatchutalkingabout dropped one of the crimp connectors :33:found a spare though.

Thanks all.

Sticky