Rf stat for elderly customer | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Rf stat for elderly customer in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,627
Guys , got a boiler to swap for a very old lady and need the EASIEST rf stat ( not programable ) so it can live at the side of her bed . What would you fit ? Thanks in advance. Cheers
 
Best is old stat with dial as you probably know already !
I think Honeywell did a fairly simple one that was just a stat but it is a while ago.
Can it not be wired ?
 
Eco stat !
I put one in for an 80+ year old and he likes it.
It has a night set back which he uses but it doesn't need to be used
.
 
What about this?

You dont need to use the app just crack on with the room stat.

 
Drayton rf stat (the twist dial one)
 
Boss therm BRT RF (Siemens RDH10RF) very simple.

Only has rotary dial and large easy see digital display.

Point and go. No setting up or binding.

Inexpensive.
 
Boss therm BRT RF (Siemens RDH10RF) very simple.

Only has rotary dial and large easy see digital display.

Point and go. No setting up or binding.

Inexpensive.
These are really really easy. But crap. I stopped fitting them as I had about 4 where it would take about 20 minutes for the heating to stay in.
I would fit a Honeywell and leave it on manual or a Drayton but not keen on them either
 
Thanks to all so far , I should have said it must be a dial rather than up and down buttons , but cheers some useful stuff .
 
If you are changing boiler the logic plus combi with ideal rf stat is a doddle to use, even

I can understand it so simples....

Has the plug in module on boiler front panel with manual tabs for setting the times for boiler on or off & one switch that allows you to have heating off/timer/constant.

The rf stat has one big twisting dial as stats of old with lcd temp display above, that's it.

Just a thought, ohh & if fitted at same time as boiler then under same 7yr warranty, other manufacturers may have similar,

Cheers,

Andy
 
Status
Not open for further replies.

Similar plumbing topics

I’ll try that. Might rip the whole lot out and...
Replies
8
Views
1K
  • Question
Its a very ingenious but devilishly cunning...
2
Replies
25
Views
3K
This any good? I think it’s who Screwfix use...
Replies
2
Views
873
Deleted member 120897
D
I would agree, but only if the high stat were...
Replies
4
Views
1K
If you have already tried to install a new...
Replies
5
Views
2K
Back
Top