sealing around flue | Plumbing Jobs | The Job-board | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss sealing around flue in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Think he used a stick of dynamite to blow that hole through !! Annoys me that , as i dont leave the job untill ive patched the holes up. Never mind leave it full stop !
 
Think he used a stick of dynamite to blow that hole through !! Annoys me that , as i dont leave the job untill ive patched the holes up. Never mind leave it full stop !

Hehe, i once made some tnt at college by mistake when i mixed the wrong chemicals together!

To say the leastvmy tutor wasnt too impressed!
 
You even used a cardboard cutout to protect the boiler! What's your number I hate making good!
 
You even used a cardboard cutout to protect the boiler! What's your number I hate making good!

Im a bit messy with a trowel hence the cardboard, plus its its easier spending a little extra time doing something at home Where the time/money factor doesnt come into play.
 
Status
Not open for further replies.

Similar plumbing topics

Fair point. There is a dearth of heating...
Replies
9
Views
1K
E
It sounds like that needs to be sealed from...
Replies
3
Views
1K
Yes your oil guy needs to change the flue. No...
Replies
10
Views
2K
If it’s in the manufacturer’s instructions...
Replies
1
Views
1K
Deleted member 120897
D
That looks like oil fit twin. Insides plastic...
Replies
2
Views
1K
Back
Top