I plan on possibly swapping a Mira element exposed mixer. For a bar shower. The pipes extend 18mm from the Finnish wall. If I pull the olives off with an olive puller. I would be hoping then to fit the surface bath shower fixing kit. As long as there is a tiny bit of play on the pipes. I need about 25mm from finish wall to attach these thanks.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Swapping Mira element for bar shower in the Showers and Wetrooms Advice area at Plumbers Forums
Similar plumbing topics
- Question
I have an existing shower which I've removed...
- JamiePattison
- Showers and Wetrooms Advice
- 0
- 735
- Latest:
- JamiePattison
- Question
What's wrong with tray on floorboards?
If for...
- wweesstt
- Showers and Wetrooms Advice
- 1
- 2K
- Latest:
- Knappers
- Question
I've just read your thread. Most decent...
- Question
I don't see your comments?
- Question
https://www.NoLinkingToThis/p/bristan-bar-valve-wa...
- Oscart
- Showers and Wetrooms Advice
- 2
- 840
- Latest:
- fowlerboi