M
manic26
Hello all good evening could anyone please shed some light on my situation from your knowledge base
Yesterday I disconnected a gas fire and capped the supply pipe off, re-lit the above boiler and came home, everything okay. This afternoon the lady claimed that the heating is not high enough and the hot water is not hot enough like it used to be before. I went this afternoon and she had a point as I did not check it before capping off the fire. I checked the pump was working, the pipes leading to both the heating and hot taps were hot. cylinder thermostat was set to 60. Boiler pilot was okay and the main burner was coming on as normal.
I even spoke to my mentor plumber but he could not figure out much about it. I know it is not my problem as the boiler was okay when it was re-lit and I only capped their gas fire but I just want to go back tomorrow again with some more and give it another try.
Many thanks in advance
Yesterday I disconnected a gas fire and capped the supply pipe off, re-lit the above boiler and came home, everything okay. This afternoon the lady claimed that the heating is not high enough and the hot water is not hot enough like it used to be before. I went this afternoon and she had a point as I did not check it before capping off the fire. I checked the pump was working, the pipes leading to both the heating and hot taps were hot. cylinder thermostat was set to 60. Boiler pilot was okay and the main burner was coming on as normal.
I even spoke to my mentor plumber but he could not figure out much about it. I know it is not my problem as the boiler was okay when it was re-lit and I only capped their gas fire but I just want to go back tomorrow again with some more and give it another try.
Many thanks in advance