The great big plumbers wish list thread. | Plumbing Jobs | The Job-board | Page 5 | Plumbers Forums
Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss The great big plumbers wish list thread. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Watertight, Yes they can often damage the pipe a small amount. As it cuts the olive it often prangs the pipe, but it's not caused me any issues to date.

At least you know where your grips are. I had an idea where I'd left my spanner. I called and was told "I've looked, not here". So I have to kiss em goodbye.

I did once leave the exact same model under a floor, when I dived under to nip up a compression joint. The next day the floor was tiled. Bye bye spanner. (I know about comp joints under the floor, but I didn't fit it, and customer just wanted it nipped up not replaced).

That hurt as I knew where the spanner was, but couldn't get to it!
 
I found an old pair of footprints under a floor and thought ooh i'll try these nice and oldskool.......Then realised why they invented proper grips...
 
I found an old pair of footprints under a floor and thought ooh i'll try these nice and oldskool.......Then realised why they invented proper grips...

Ha!! Really? I have some foot print copies (cheap from Toolstation) never used them.
 
I found an old pair of footprints under a floor and thought ooh i'll try these nice and oldskool.......Then realised why they invented proper grips...

Some people rave about footprints but I hate the things, do you have to have hands like shovels to use them or something?
 
That reminds me, I've got a small 'frenchman' ( side jaw adjustable, not Carla Bruni's fella whose name escapes me!). An 8 or 10'' one of those would be nice but i haven't even seen them at boot sales or autojumbles
 
Ah!!

Yeah, it would be handy....
10mm olives are a git to get off, as the soft copper means it's often on there forever!!

If you make a tool that can do them all, put me down for one.
see the 'olivepulloff' tool on eBay or YouTube. One tool for 10,15 & 22mm
 
I wouldn't even attempt to pull or cut off an olive on minibore.

Ive been forced to cut the olive and replace in the past ( micro bore) due to not much available pipe coming out of walls etc, only with a heallthy dose of liquid ptfe all over the new olive due to pipe throttling.
 
One I'd like especially for push fit towel rad valves are push fits for chrome pipe. It's a pain in the rse having to grind off the chrome.
 
[DLMURL="http://www.pegleryorkshire.co.uk/Tectite/socialhousing/docs/products/ProductDetails.aspx?Id=14a76b1b-feee-41c8-90cb-d8e1d35e23de&Rid=e0fca590-bb37-4c9e-a9a5-ea802428a640"]Tectite Social Housing Improvement[/DLMURL]
 
Last edited by a moderator:
Battery powered solder dispenser. Just press the button and the solder comes out.
 
Saw this X-Hose on a shopping channel this morning and thought it was pretty good how it expands and shrinks. It'd certainly save some room in the van.
 
[video=youtube;sw-fmemXDZQ]http://www.youtube.com/watch?v=sw-fmemXDZQ[/video]
 
Saw this X-Hose on a shopping channel this morning and thought it was pretty good how it expands and shrinks. It'd certainly save some room in the van.

Probably not work on low pressure as a drain down hose particularly well either. Seeing it contract about ten foot in the video under mains pressure with the sprinkler on I can see it contracting back to it's original length whilst draining down. Can you imagine the scene as the hose contracts back into the hallway and pours black water all over Mrs Jones new cream shag pile.
 
Probably not work on low pressure as a drain down hose particularly well either. Seeing it contract about ten foot in the video under mains pressure with the sprinkler on I can see it contracting back to it's original length whilst draining down. Can you imagine the scene as the hose contracts back into the hallway and pours black water all over Mrs Jones new cream shag pile.
That's a very good point.
 
I once made the mistake of getting a lay flat hose to save room. I must have had my stupid head on that day, whatever made me think I could drain down through it, it wasn't even any good on mains pressure.
 
[DLMURL="http://www.reginproducts.co.uk/flow%2526pressure/REGR09"]REGR09 - Drain-Down Hose Kit | Regin[/DLMURL]

T
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

    • Like
  • Locked
Only legal for up to cat 3 on domestic which...
2
Replies
47
Views
1K
T
R
    • Like
  • Locked
That answers me question, Well done you.
2 3
Replies
54
Views
8K
Whyme
W
A
  • Locked
Hi everyone, i am posting this on behalf of...
Replies
0
Views
1K
andyh1984
A
Back
Top