Ufh 50 zones !!? | UK Plumbers Forums | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Ufh 50 zones !!? in the UK Plumbers Forums area at Plumbers Forums

O

on31ll

Anybody know of a controller able to control 5 manifolds with 10 zones on each manifold


back story is its installed in a church 5 manifolds on the wall all fed off a domestic boiler. All manifolds fed in 22mm. The church left the heating on for 3 days solid and it moved up one degree !!!!!
 
When you say the manifolds are fed off 22mm mains, are each manifolds mains taken back to the boiler location or are they al fed off the one set of 22mm mains?

Can you not provide a simple drawing of the installation?
 
Last edited:
I havent been back to be able to take pics. Got a rep coming out as he said he has seen this exact install before and there was actuators etc.

There are 5 manifold and theses are mounted in what look like radiator covers in the main church. 2 on the left wall and 3 on the right wall. Directly opposite.

The 22mm leaves the boiler travels 10meters to the first manifold then into the second. Then goes right around the room to connect into the 3rd then 4th then 5th.
 

Similar plumbing topics

  • Question
Hello Sergiu I would use it, but it's hard to...
Replies
1
Views
427
I think its a room stat per UFH room zone
Replies
2
Views
834
  • Question
We currently have the ground floor wet UFH and...
Replies
0
Views
873
  • Question
Hi, I am using mu UFH for the first time and...
Replies
0
Views
626
  • Question
I agreed with this. Is the whole house not...
Replies
4
Views
2K
Back
Top