Using Indirect Cylinder To Heat Radiators | Plumbing Jobs | The Job-board | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Using Indirect Cylinder To Heat Radiators in the Plumbing Jobs | The Job-board area at Plumbers Forums

Direct thermal store fed from a solid fuel burner or air source heat pump would be my suggestion.
If it’s heated electrically: 6 rads, day 1kw each, 2 kw to heat cylinder plus 20% that’s about a 10kw requirement. With a 3kw immersion? Ok 2 immersion’s? 3 immersion’s?
It starts to get a bit silly doesn’t it :)
 

Similar plumbing topics

Thermal store fits the bill but don’t forget...
Replies
1
Views
407
T
Get an acv cylinder. Great for boiler and work...
Replies
2
Views
731
Pin hole leak on suction side of pump.
Replies
1
Views
516
That means you have a leak as the system...
Replies
9
Views
900
Gas inspection happened, and the technician...
Replies
9
Views
2K
Back
Top