what do you think of this install

[stevetheplumber]

stuck right in the eaves pipes all run across in front of the boiler so you cant get in front of it to work as far as i can make out there is no low water pressure switch on boiler so not a good ide for top of the house you have to unscrew a panel just to get in lagged pipe work but not the fittings and theres a filter tucked in the pipe work with the flush out valve about an inch above the ceiling pipework is copper with plastic fittings can only get one hand over to the airvents and you cant unscrew them as they are into pushfit and just spin one handed so cant tell if they are open or shut
three years old was moved up from the cupboard below any guesses whose work it is and how much they charged?

 

[Billy Bob Bob]

its RAF

 

[ShaunCorbs]

rubbish

diy/non gas safe and 1k

 

[Phil]

There is such little space left in London, are boilers getting shoved into crawlspaces now with all the spiders?

 

[Rickster123]

Clips, lagging, And decent AAV's.... Worcester lets it down..

 

[quality]

only lagged to hide the carp!

 

[ShaunCorbs]

only lagged to hide the carp!

+1 and no valves for aav

 

[hammers4spanner]

Great pipework pants boiler lol

BG install 4,1 k

 

[quality]

at least the boiler looks square from that angle lol

 

[Rickster123]

+1 and no valves for aav

Valves??

 

[Billy Bob Bob]

Valves??

for maintenance

 

[hammers4spanner]

Valves??

I thought that lol

 

[ShaunCorbs]

Valves??

for maintenance / changing them saves draining down / other problems

 

[Rickster123]

I thought that lol

Put a leaky ballofix valve in incase the the Aav leaks? I've been missing a trick all these years!

 

[ShaunCorbs]

Put a leaky ballofix valve in incase the the Aav leaks? I've been missing a trick all these years!

lever valve

 

[Billy Bob Bob]

Put a leaky ballofix valve in incase the the Aav leaks? I've been missing a trick all these years!

you can buy quality ones that dont leak,i also fit full bores to motorised valves,i will often be the one changing them

 

[Billy Bob Bob]

shaun,like me clearly does maintenance,build in a easy fix

 

[hammers4spanner]

Cant see point of it personally

 

[lame plumber]

never did find out who put it in..............

 

[Rickster123]

Cant see point of it personally

Not when you can swap them live!

 

[ShaunCorbs]

shaun,like me clearly does maintenance,build in a easy fix

you always need to think ahead, and how can i make this easier to either me or the next guy to change / fix

 

[hammers4spanner]

Not when you can swap them live!

Yeah i like a bit of snatch

 

[Rickster123]

you always need to think ahead, and how can i make this easier to either me or the next guy to change / fix

That's very Christian of you. I say sod the next guy! :chinese:

 

[ShaunCorbs]

Not when you can swap them live!

swap them live with 70 dc water coming at you (mind you most dom places dont have auto fillers , least once the pressures gone the water stops)

 

[stevetheplumber]

half a point for hammers yes bg fitted it 5k plus vat and the aavs have the auto shut offs under them you just have to lay on the unsupported pipework to reach them