what do you think of this install | Plumbing Jobs | The Job-board | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss what do you think of this install in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Even with genuine balofix valves. After a few years on heating. As soon as you use them they pixx out. Then you have to drain down to fix a leak on a valve to fix the initial problem.!
 
half a point for hammers yes bg fitted it 5k plus vat and the aavs have the auto shut offs under them you just have to lay on the unsupported push fit jointed pipework to reach them

:D post it to bg twitter page and see what they say :D
 
Climbing over that un-clipped condense line to reach boiler seems like a disaster waiting to happen.
 
a night mare to work on i cant belive any boiler doesnt fail safe when the water runs outand the stupidity of choosing that model to go in a loft at the top of the house
thomson your righ its hanging in the breeze right where you want to lay to reach the boiler
 
Status
Not open for further replies.

Similar plumbing topics

    • Like
Alpha 2/3 manual. Shows variant with air...
Replies
8
Views
1K
  • Question
There's worse work than somewhere or other...
Replies
5
Views
1K
"strap wrench" or "boa" might help
Replies
7
Views
3K
D
As above The Grant instructions tell you to...
Replies
3
Views
970
Back
Top