Wireless digital clock for sarigas zoom420a | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter yowwox
  • Start date
  • Replies 4
  • Views 1K

Discuss Wireless digital clock for sarigas zoom420a in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
Y

yowwox

Is it possible to fit a digital clock to replace existing grasslin mechanical clock in a Sarigas 420 zoom boiler. It would give greater flexibility to the heating programmes e. g. weekdays / weekends etc.
 
Yes you can. not a problem,should be able to fit it in the same place as existing integrated one or you could fit external digital clock to give you greater chose


imho
 
Last edited by a moderator:
Thanks for that. I was looking at an Alpha 7 day heating clock. Do Grasslin do a similar one or are there any others I should consider?
 
The alpha clock will fit in and you can use ,however you will have to check clock voltage of motor should be 230v however there are some low voltage units,it will stated on the back of unit,do check as connections are the same,should be in boiler manual
 
Thanks for the info. I'll check the details in the manual. The wiring, as you say, should match
 
Status
Not open for further replies.

Similar plumbing topics

Replies
14
Views
1K
  • Question
Its a very ingenious but devilishly cunning...
2
Replies
25
Views
3K
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
H
Hi there, thanks for your time to look at this...
Replies
0
Views
912
HRP123
H
That is true - however with Vaillant...
Replies
4
Views
967
Back
Top