Wiring s plan from old set up y plan...?

[Notagainpike]

Hi all, so things are coming on now at last!
New 250 cylinder in loft all pretty much plumbed in.
F+E tank binned off, new ups pump, 2 new zone valves imstalled...
Now im up to wiring up, have done the immersion, so we have hot water, ive wired in the dual stat. I have me head roughly into what i think is correct...
Last night when i was pressing the advance on the controller, noet was happening....no red light to indicate and no boiler fire....
i did see when i moved the contoller, there are some jumper links on the back of the unit...do i need to move these when going from y to s paln??

 

[Notagainpike]

Doesn’t your boiler need Pl and Sl ?

😖 what do you mean sorry?

 

[ShaunCorbs]

Orange x2 to boiler black(sleeved with brown)
And brown to pump

So you don’t have a call from the room stat / timer as you won’t have 240v on brown

 

[ShaunCorbs]

😖 what do you mean sorry?

Permanent live and switch live

 

[Notagainpike]

Yes

Are the oranges with the pump from the port valves and do you have 240 v on the brown to a port valve ?

Have 240v at both browns

 

[Deleted member 120897]

Sounds like microswitch not making. Motorised valves new? Have you heard them open?

 

[Notagainpike]

Ive got my live from my prg. To my greys

 

[Notagainpike]

Sounds like microswitch not making. Motorised valves new? Have you heard them open?

Yeah, pair of new valves, il whip the covers off

 

[Deleted member 120897]

Have you got 240 on orange when testing between a known neutral/earth, when there’s a demand from programmer and a thermostat?

 

[ShaunCorbs]

Ive got my live from my prg. To my greys

No greys are perm live

Your live from the prog for heating goes to the room stat and then to the brown on the port valve

 

[Notagainpike]

Have you got 240 on orange when testing between a known neutral/earth, when there’s a demand from programmer and a thermostat?

I have

 

[Notagainpike]

No greys are perm live

Your live from the prog for heating goes to the room stat and then to the brown on the port valve

Sleeve donates a switched live...yes??

 

[ShaunCorbs]

Sleeve donates a switched live...yes??

Depends on colour brown live blue neutral etc

 

[Deleted member 120897]

I have

So to clarify:

At motorised valves you have a permanent 240 live on grey, 240 on orange and 240 on brown when calling?

 

[Notagainpike]

This was how it was on y plan...

 

[Notagainpike]

Depends on colour brown live blue neutral etc

Red sleeved brown

 

[Notagainpike]

So to clarify:

At motorised valves you have a permanent 240 live on grey, 240 on orange and 240 on brown when calling?

Yeah...

 

[Notagainpike]

This was how it was on y plan...

 

[Deleted member 120897]

Are those white wires still connected? Can you post a decent photo of those Wago connectors?

 

[ShaunCorbs]

Your missing something as the pump would run

 

[Notagainpike]

No greys are perm live

Your live from the prog for heating goes to the room stat and then to the brown on the port valve

Yes, sorry, my greys are fed from perm live, which also feeds the prog.
Output from the prog. For heating, goes to nothing currently!!!

 

[Notagainpike]

Black on 10 i believe is hw out from prog.

 

[ShaunCorbs]

Time for a rewire and start from scratch bell the existing cables out to see what you’ve got down stairs and adjust in the box to match

 

[Notagainpike]

Time for a rewire and start from scratch bell the existing cables out to see what you’ve got down stairs and adjust in the box to match

Hope you guys arnt busy tonight...🤣

 

[ShaunCorbs]

Just follow the picture I sent etc eg you will be fine

 

[Notagainpike]

Are those white wires still connected? Can you post a decent photo of those Wago connectors?

So, i think its all right,
I have my browns to the blue, and red,
Which run back up to the out puts from cylinder stat and room stat..